Hộp giảm tốc – Bơm thủy lực

• Moment: Up to 250Kn.m
• RPM: 3000rmp max
• Ratio: 1:1 / 1:2/ 1:3 / 1:4 / 1: 5 / 1:6

TECHNICAL DATA

Ratio – Represents the ratio between the input speed (prime mover) and output speed (pumps).
Ratios lower than one indicate the unit acting as a speed increaser and higher than one acting as a speed reducer.
Note the output ratio is identical on all outputs ports of the same unit.

Maximum input torque M1 (Nm) – Is the maximum torque which can be transmitted by the input shaft to give a theoretical gear life (L10) of at least 5,000 hours.

For units that are fitted with a clutch or a coupling the maximum input torque may be limited by the torque capacity of the clutch or coupling.

Each output maximum torque M2 (Nm) – Is the maximum torque that can be transmitted by each output port.

Maximum speed N1 (RPM) – Is the maximum speed of the input shaft.

Moment of inertia J (Kg/m²) – Is referred to the input shaft and is calculated in accordance with ISO standards.