- Moment: Up to 250Kn.m
- RPM: 3000rmp max
- Ratio: 1:1 / 1:2/ 1:3 / 1:4 / 1: 5 / 1:6
TECHNICAL DATA
Ratio – Represents the ratio between the input speed (prime mover) and output speed (pumps).
Ratios lower than one indicate the unit acting as a speed increaser and higher than one acting as a speed reducer.
Note the output ratio is identical on all outputs ports of the same unit.
Maximum input torque M1 (Nm) – Is the maximum torque which can be transmitted by the input shaft to give a theoretical gear life (L10) of at least 5,000 hours.
For units that are fitted with a clutch or a coupling the maximum input torque may be limited by the torque capacity of the clutch or coupling.
Each output maximum torque M2 (Nm) – Is the maximum torque that can be transmitted by each output port.
Maximum speed N1 (RPM) – Is the maximum speed of the input shaft.
Moment of inertia J (Kg/m²) – Is referred to the input shaft and is calculated in accordance with ISO standards.
